 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| D-configuration Connectors for Digital Broadcasting Equipment DXLM Series Accepts panel thickness up to 3 mm DXM Series (Panel thickness up to 1.6 mm thick) 5.2 DXLM Series 6.7 Features 1. Increased range of the mounting panel thickness Extension of the mating and locking area by 1.5 mm has allowed the DXLM Series to be mounted on panels up to 3mm thick. Effective protection against electrostatic discharge Static electricity Shell 2. Effective protection against electrostatic discharge Unique Hirose Electric design makes reliable ground connection in sequence, with metal shell first, then the board circuit. 3. Temporary board holding feature Deflecting force of the side protrusion of the insulator's posts against the walls of holes provides superior retention to the board, preventing leaning forward during handling. To board 4. Superior stability and retention to the board Solid metal grounding posts are soldered to the board. This creates extremely strong retention to the board, allowing the assembly to retain reliable connections, even when large forces are applied when miss-mating or pulling. Superior stability and retention to the board 5. RC-5237, EIAJ Standard Conforms to the requirements for D-configuration connector used in connections for digital image broadcast. Insulator's post Metal grounding post Applications TV, STB, DVD, LCD TV and other equipment supporting digital broadcasts Side protrusion 2002.11 3 1 Product Specifications Current rating Rating Voltage rating Item 1. Contact resistance 2. Insulation resistance 3. Withstanding voltage 4. Mating/un-mating forces 5. Durability (mating/un-mating) 6. Vibration 7. Shock 8. Humidity (Steady state) 9. Temperature cycle 10. Salt Spray 250 V AC Specification 80 m ohms max. 500 M ohms min. No flashover or insulation breakdown 30N max. (mating) 4.2N min. (un-mating) Measured at 500 V DC 500 V AC applied for one minute With corresponding connector assembly. Conditions Measured at 100mA DC 1 A DC Operating temperature range -25 C to +70 C o o Contact resistance: 25 m ohms max. variation from initial value 500 No damage, cracks, or parts dislocation No electrical discontinuity of 1 ms or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours / 3 axis No damage, cracks, or parts dislocation Acceleration of 490 m/s2, 6 ms duration, sine half-wave wave form, 3 cycles in each of the 3 axis Contact resistance: 25 m ohms max. variation from initial value 96 hours at 40oC, humidity of 90% to 95% Insulation resistance: 100 M ohms min. Contact resistance: 25 m ohms max. variation from initial value Temperature: -25 C --> +5 C to +35 C --> +70 C --> +5 C to +35 C Duration: 30 --> 2 to 3 --> 30 --> 2 to 3 (Minutes) Insulation resistance: 100 M ohms min. Contact resistance: 25 m ohms max. variation from initial value Exposed to 5% salt water solution for 48 hours o o o o o o Material Part Contact: Receptacle Contact: Plug Insulator Shell Cover Cable outer insulation Brass Phosphor bronze PBT Stainless steel PVC PVC Material Finish Selective gold plating Selective gold plating Color: Black Remarks . . UL94V-0 . Color: Gray Color: Gray . . . Ordering Information Receptacles DX 1 Plugs 10 LM 2 1 1 . 14 3 4 S 5 E 6 DX 40 LM 1 2 1 . 14 PP . 150 4 7 8 6 CV 9 1 Series name: DXLM 2 Termination type 10: PCB Right-angle through hole type 20: PCB Straight through hole type 40: Soldering type Board mounting type E: Temporary insulator's post 7 Cable Harness type PP: D-configuration connector at both ends P: D-configuration connector on one end/single audio connectors on other end 3 Form type Blank: Standard item 1: Miniature type 2: Miniature panel single screw panel attachment 8 Overall length 150: 150 cm 300: 300 cm 4 Number of Positions: 14 5 Configuration of mating side S: Receptalce 2 9 Cover type CV: Standard Receptacles PCB Right-angle through hole type 15 17.14 19.54 36 29 7.62 1.27 No.7 No.1 4 3 No.14 15.94 No.8 5.6 10.6 6.3 5 3 5 6 9 Part Number DX10LM-14SE CL No. 230-5256-0 Miniature PCB Right-angle through hole type 6.3 5 17.14 19.54 22.54 7.62 No.7 1.27 No.1 11.5 3.9 4.8 9.3 No.14 15.94 No.8 3.985 4.785 6.69 8.595 Part Number DX10LM1-14SE CL No. 230-5258-5 3 3 Miniature PCB Right-angle through hole type (Single panel screw) 6.3 5 17.14 19.54 22.54 12.26 No.7 7.62 1.27 No.1 9.7 11.65 8.1 11.5 3.9 4.8 9.3 16.45 No.14 15.94 No.8 3.985 4.785 6.69 8.595 10.5 Part Number DX10LM2-14SE CL No. 230-5262-2 PCB Straight through hole type (Double panel screws) 38 29 7.62 No.7 1.27 No.1 No.14 19.54 17.14 No.8 Part Number DX20LM-14SE CL No. 230-5257-2 6.3 5 3 15.94 34.4 4 4 15 12 3 Plug Connectors (Cable assemblies) D-configuration connector to D-configuration connector Wiring Table Connector A Contact No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Connector B Contact No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Pin assignment Y Y-GND Pb Pb-GND Pr Pr-GND Auxiliary line 1 Line 1 Line 2 Auxiliary line 2 Line 3 Switch GND Auxiliary line 3 Switch Shorted Unit: cm Part Number DX40LM-14PP-150CV DX40LM-14PP-300CV CL No. 230-5260-7 230-5268-9 L 150 300 12.5 MAX. Contact No. 7 Contact No. 14 Connector A Connector B 26.2MAX. Contact No. 7 Contact No. 14 Contact No. 1 Contact No. 8 Contact No. 1 42 L Wiring Table Contact No. 8 42 Connector A Connector B: Green Connector C: Blue Connector D: Red Pin assignment Contact No. Contact No. Contact No. Contact No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 2 . . . . . . . . . . . . . . 3 4 . . . . . . . . . . . . . . 5 6 . . . . . . . . Y Y-GND Pb Pb-GND Pr Pr-GND . . . . . . . . Shorted Unit: cm Part Number DX40LM-14P-150CV DX40LM-14P-300CV 12.5MAX. CL No. 230-5261-0 230-5269-1 L 150 300 Connector B: Green Contact No. 7 Contact No. 14 26.2MAX. Connector A Contact No. 2 Connector C: Blue Contact No. 4 Contact No. 1 o /11.7 Contact No. 3 Contact No. 6 Contact No. 5 Contact No. 1 Contact No. 8 Connector D: Red 5 SBoard Mounting Pattern 29 15.94 7.62 2- 15.94 14.24 No.1 No.2 2/o 2. 8 14 /o 3 2- o2 / 5.4 9 11 3 6 2.8 1.1 1.905 o / 4- 2. 2 No.14 No.13 No.9 No.8 Board edge No.14 No.13 2.15 23 Board edge 2- o /2 No.8 .2 No.9 DX10LM.14SE 34.4 15.94 7.62 14 No.7 - /o 0. 9 DX10LM1.14SE DX10LM2.14SE 3 2- /o 2 .8 1.27 No.6 No.1 No.2 4- /o 2 .2 No.14 No.13 No.8 No.9 DX20LM.14SE SPanel Cutout (Panel thickness 3 mm Max.) 9 21.5 29 21.5 22- . R0 4- 5 21.5 /o 3 .3 /o 3 4-R .3 0.5 0.8 4.5 5 3.81 5.715 .2 No.7 - /o 0. 9 1.27 No.6 No.6 No.7 14 -/ o 0.8 7.62 1.27 No.1 No.2 .6 0.5 4-R 8.5 DX10LM.14SE DX20LM.14SE 8.5 DX10LM1.14SE DX10LM2.14SE Note: Use screw M3 x 10 ( class 1 or 2). Panel screw fastening torque: For assemblies DX10LM-14SE, DX20LM-14SE and DX10LM1-14SE: 0.5 to 0.7 Nm. For assembly DX10LM2-14SE: 0.6 to 0.8 Nm. 6 8.5 MEMO : 7 |
Price & Availability of DX40LM-14PP-300CV
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |